View your Cart Checkout
 
 

text graphic reading: select the right screen.

Replacing an existing mesh screens:?

Measure the height and width of existing screen (not including the hanger rings). Order same height screen. Condar's hanger rings add ½ inch (1 cm) to total height.

Diagram explaining how to measure the screen

and get a set of matching pulls - FREE!


Buying a screen and a Rod and Valance Kit?

If you do not already have a screen rod installed, it is recommended that you order a . When ordering both a Rod and Valance Kit and a screen choose a screen size 2 inches (5cm) shorter than the height of your fireplace opening.

and get a set of matching pulls - FREE! 

Buying a screen and already have a rod installed?

If you already have a rod installed, measure the width of your fireplace opening in inches. Measure the height of your opening and subtract ½ inch (1 cm) for the hanger rings below the rod, and approximately ½ inch (1 cm) for clearance at the bottom (1 inch: 3 cm total).

Measure your fireplace opening

and get a set of matching pulls - FREE!

Condar pre-cut standard screens come as a pair of two panels. Each standard panel is 24 inches (61 cm) wide, a total of 48 inches of mesh. This allows for 40 inches (102 cm) of total coverage (plus extra screen for draping) when the screens are arranged together.



 
Condar Company | Columbus, North Carolina | 828.436.2102 | Monday - Friday 8 am - 5 pm | Site Map